Epoxy garage floors, pool deck coatings, driveways, patios and commercial concrete, professionally installed with full flake systems across Boca Raton, Palm Beach County and Broward County.
Fill out our short online form and receive your pre-quote in under 30 seconds. No calls needed to get started.
Real garage floor, pool deck and driveway coating projects across Boca Raton, Parkland and Broward County. Drag the handle to compare the original concrete with the finished floor.
Two full flake concrete floor coating systems for garages, pool decks, driveways, patios and commercial floors. Both start with professional diamond grinding and concrete preparation. Pricing ranges from $5.50 to $12 per sq. ft., depending on the condition of the floor and the system: epoxy, polyaspartic or metallic.
Recommended primarily for garages
Garages · Patios · Pool decks · Driveways · Commercial areas
From epoxy flooring for garages to polyaspartic coatings for pool decks and driveways, every project gets the same diamond grinding, concrete preparation and full flake finish. We recommend the Standard or Premium system based on how the space is used.
Epoxy and polyaspartic full flake garage floors in Boca Raton and across South Florida that resist stains, hot tires and daily wear.
See garage floor coatings
UV-resistant polyaspartic driveway coatings built for Florida sun that refresh curb appeal.
Get a quote
Pool deck coatings for Palm Beach and Broward County homes: a finished, textured surface made for sun and wet feet.
Get a quote
Patio concrete coatings that turn a plain slab into an outdoor space you want to use.
Get a quote
Durable commercial epoxy and polyaspartic floor coatings for restrooms, shops, warehouses, showrooms and work areas across South Florida.
See commercial flooringDecorative flake flooring comes in blends from clean and light to dark and bold. The colors shown are examples; your final blend is confirmed with your quote.
Diamond grinding and proper concrete surface preparation are what let a coating bond to the slab and last, so we never skip a step. It starts with your free quote, where you choose your system and flake blend. Then our crew handles all nine steps, in order.
Diamond grinding opens the concrete surface so the coating can bond properly. It also removes old sealers and surface contaminants.
Walls, corners and edges are ground and detailed by hand so the coating reaches every inch.
Cracks, pits and damaged areas are repaired for a smooth, durable finish.
Industrial vacuums remove grinding dust so nothing sits under the coating.
An epoxy or polyaspartic base coat goes onto the prepared concrete to build a strong foundation.
Decorative flakes are broadcast to full coverage for color and texture.
Loose flake is scraped and vacuumed away for a clean, even surface.
A polyaspartic clear topcoat seals the flakes and protects the floor. Premium uses a premium clear coat for enhanced UV resistance.
We inspect the finished floor before we call the job done.
Diamond grinding and repair before a single coat goes down.
Uniformed crews who arrive with the right equipment.
Epoxy and polyaspartic options matched to your space.
Industrial vacuuming and a tidy job site from start to finish.
Our Premium polyaspartic system is backed by a lifetime warranty.
Serving Palm Beach and Broward County.
Epoxy Dog installs epoxy and polyaspartic concrete coatings for homeowners and businesses in Boca Raton and throughout Palm Beach County and Broward County.
From epoxy garage floors in Boca Raton and Parkland to pool deck and patio coatings in Delray Beach, Boynton Beach, Deerfield Beach, Coconut Creek and Coral Springs, our crews prepare the concrete properly and install full flake systems built for South Florida sun, heat and daily use. See our coating systems and recent projects.
Tell us where your project is and we will recommend the right system for the space.
Most projects range from $5.50 to $12 per sq. ft., depending on the condition of the floor and the system: epoxy, polyaspartic or metallic. The cost depends on the size of the space, the condition of the concrete, the system you choose (Standard epoxy or Premium polyaspartic) and your flake blend. The fastest way to get a number is to fill out our short form and receive your pre-quote in seconds. We confirm it during your free estimate.
Both of our systems are full flake floors that finish with a polyaspartic clear topcoat. The Standard system uses an epoxy base coat, is recommended primarily for garages and includes a 15-year warranty. The Premium system uses a polyaspartic base coat and a premium polyaspartic clear topcoat for higher durability and enhanced UV resistance, includes a lifetime warranty and is also recommended for patios, pool decks, driveways and commercial areas. Read our full epoxy vs. polyaspartic garage floor guide.
Full flake floors use a decorative flake broadcast to full coverage for a consistent, textured look. Metallic epoxy floors use metallic pigments worked into the coating for a fluid, three-dimensional finish, often used in showrooms, commercial spaces and statement garage floors. Both start with the same diamond grinding and concrete preparation, and both can be finished with a protective topcoat.
No. Full flake is our most requested system, but we also install metallic epoxy floors for garages, showrooms and commercial spaces. Ask about metallic options with your free quote.
Our Premium polyaspartic full flake system is a one-day floor coating installation thanks to its fast cure. The Standard system is typically a 1 to 2 day installation. Your free estimate will confirm timing for your specific space.
Yes. Every floor starts with professional diamond grinding and concrete preparation, followed by crack repair, edge detailing and industrial dust removal before any coating goes down. Proper surface preparation is what allows the coating to bond to the concrete.
Yes. Our Premium polyaspartic full flake system is recommended for driveways, pool decks, patios and commercial areas, as well as garages.
Yes. Polyaspartic clear coats are UV stable, and our Premium system is designed for enhanced UV resistance, which matters for sun-exposed surfaces in South Florida such as driveways, patios and pool decks.
With professional surface preparation and proper installation, full flake floors are built for long-term durability. The Standard system is backed by a 15-year warranty and the Premium system by a lifetime warranty. Actual lifespan also depends on how the floor is used and maintained.
Sweep or dust mop regularly and clean with a mild, pH-neutral cleaner and a soft mop. Wipe up spills, avoid harsh abrasive tools, and use soft or non-marking pads under heavy items. Ask us for care instructions for your specific system.
Yes, we offer financing. Ask about our financing option during your quote visit.
The Standard epoxy full flake system includes a 15-year warranty and the Premium polyaspartic full flake system includes a lifetime warranty. Ask for the full warranty terms with your free quote.
We install concrete coatings in Boca Raton, Delray Beach, Deerfield Beach, Parkland, Boynton Beach, Coconut Creek, Coral Springs and across Palm Beach County and Broward County, Florida.
Fill out the short form, get your pre-quote in seconds, and let the Epoxy Dog team help you choose the right coating system for your space.
Get an Instant Quote
